Klipco Clamps

Klipco is one of the leading manufacturers of hose clamps in the country. The company produces over 1, 80, 000 clamps a day in its factories which are spread across India. Klipco clamps are rigorously tested and are also ISO certified.

The company offers a wide range of industrial clamps to suit every need of its customers.

Screw clamps consist of a galvanized or stainless steel band into which a screw thread pattern has been cut or pressed. One end of the band contains a captive screw. The clamp is put around the hose or tube to be connected, with the loose end being fed into a narrow space between the band and the captive screw. When the screw is turned, it acts as a worm drive pulling the threads of the band, causing the band to tighten around the hose (or when screwed the opposite direction, to loosen). Screw clamps are normally used for hoses 1/2 in diameter and up, with other clamps used for smaller hoses.

Pairs of screw clamps on a short rubber unit form a “no-hub band,” often used for attaching sections of domestic wastewater piping, or used for other pipes as a flexible coupler (to fix alignment difficulties or to prevent pipe breakage due to relative movement of sections) or an emergency repair.

They can also be used in a similar way, as a simple means for the transmission of small amounts of power. A short length of hose is clipped between two shafts where vibration or variations in alignment may be taken up by the flexibility of the hose. This technique is well adapted to use for mock-ups in a development laboratory.

Authorized Dealer
Shopping Basket